Part 1
ADVANCE ADAPTERS JEEP MOUNTS
Advance Adapters has been busy producing V8 conversion engine mounts for over 30 years. Their mounts cover Jeeps from 1947 to the present model Wrangler. They now introduce a new generation of conversion mounting systems for Jeep TJs 1997 and up. GM V8 and Dodge V8 mounts are also available. These mounts are a weld-in design, and hold up well to severe off road use. For more tech info contact 800-350-2223 or check out www.advanceadapters.com.

BESTOP MOLDED BIKINI TOP
The Bestop Molded Bikini comprises of an overhead center console, easy to remove interlocking side panels, and a wiring harness to supply power to included map lights, speakers and 12-volt power outlet. Outer skins feature black injected molding with UV resistant coating while the foam-injected inner skin colors are perfectly matched to your interior. The center console with adjustable rear brackets fits under factory and aftermarket soft and hardtops. A mesh storage pocket stashes small items. The lightweight panels, made of tinted, scratch-resistant acrylic, include latches to attach to the windshield and rear web straps to secure to your rollbar. The Molded Bikini is compatible with vehicles with and without sport bar pads as well as vehicles with OEM and aftermarket soundbars and sound pods. It’s available in charcoal, black denim and spice for ’86-95 and ’97-04 Wranglers, as well as dark tan for ’97-04 Wranglers. For more tech info contact 800-845-3567 or check out www.bestop.com.

ADVANCE ADAPTERS SATURN OVERDRIVE
If you’re old enough to remember the “bolt-in” overdrives for the Dana/Spicer18 transfer case — you’ll be excited to see it again. Those unfamiliar with the unit should note that the Saturn Overdrive from Advance Adapters Inc. is available for all the input gears used in the Dana/Spicer 18. The unit is self-contained and offers a 25% reduction in any gear. No driveline modifications are necessary. Shifter assemblies are available for all the stock Jeep transmissions as well as a universal kit for conversions. For more tech info contact 800-350-2223 or check out www.advanceadapters.com.

ARB AIR LOCKERS
ARB’s Air Lockers are an off road accessory that provides exceptional traction when it’s most needed. Both front and rear Air Lockers are available for most Jeeps and high quality materials are used in the construction process ensuring maximum strength and durability. Applications include the new Super Dana 30 and Super Dana 35 axles with the upgraded 30-spline axle shafts. An ARB Air Locker is a driver controlled locking differential designed to give the serious traction needed to combat extreme off road terrain. Manually operated from within the vehicle, the Air Locker can be engaged with the flick of a switch. An on board air compressor releases a small burst of high-pressure air into the differential, which in turn engages the locking mechanism. This prevents the wheels from turning independently and allows for a more controlled driving approach in steep or unpredictable conditions. A second flick of the switch disengages the Air Locker, returning it to a standard “open” style of differential. For more tech info contact 888-427-2872 or check out www.arbusa.com.

(TO ORDER CALL 4 WHEEL PARTS AT 800-284-9840

BESTOP NEW TWO-PIECE HARDTOP
Bestop designed its two-piece hardtop with styling and features that offer an innovative removable front cockpit section which can be stowed on the optional roof rack. Constructed of fiberglass-reinforced plastic, the molded-in gel coat delivers UV-resistant color. The Bestop Hardtop is available with or without matching upper doors, which offer dual sliding windows and a convenient armrest. Windows are DOT-approved tinted glass with integral vents to keep the side glass clear. A washable headliner provides both insulation and noise reduction for a quieter ride. Overhead mesh pockets are built into the cockpit cover, along with a standard overhead dome light. The rear hatch provides easy access with gas-charged struts and a latch mechanism that locks without a key when closed. The rear window features a defroster to quickly clear fog or melt ice. The Hardtop is available in black, tan and charcoal for the ’86-95 and ’97-04 Wranglers. For more tech info contact 800-845-3567 or check out www.bestop.com.


BESTOP INTRODUCES NEW MOLDED DOORS
Bestop Molded Doors are for those who want the open-air feel of a half door, with the protection of a hard door. Constructed of polyurethane with UV stable molded-in coating, these molded doors attach directly to factory door mounts — compatible with both OEM and Bestop soft upper doors and upper door sliders. They feature heavy-duty door latches with a generous seal around the door perimeter, and offer a mounting area for OEM mirrors. Inside, foam-injected, color matching inner panels are molded with a comfortable armrest, map pocket and built-in courtesy light. Featuring 400-watt, 6-1/2 inch Cuspid® coaxial speakers, they will provide a new dimension to your sound system. All necessary hardware, including wiring harness is included. These doors are available in charcoal, black denim and spice for ’86-95 and ’97-04 Wranglers, as well as dark tan for ’97-04 Wranglers. For more tech info contact 800-845-3567 or check out www.bestop.com.

TUFFY SINGLE COMPARTMENT OVERHEAD
The newly redesigned Single Compartment Overhead is manufactured from 16-gauge steel and has a lockable compartment for securely mounting a stereo, CB radio, speaker, or other electronic equipment. The lockable compartment features Tuffy’s Pry-Guard Locking System, which is designed to create a deadbolt effect. Pry-Guard incorporates an extremely pick resistant ten tumbler lock and includes a long mounting shaft for increased strength. A bolt in stereo mounting tray makes installing a DIN mount stereo or CB radio a breeze. The console expands from approximately 28”L to 36.5”L to fit a wide range of applications, including the 2003-2004 TJ Wranglers, and is protected by a durable textured powder coat finish. Mounting hardware is provided. For more tech info contact 800-348-8339 or check out www.tuffyproducts.com.

TUFFY TJ SERIES II SECURITY CONSOLE
When asked who his hair stylist was, Albert Einstein replied, “The copper penny in the light socket.” Unfortunately, it’s human nature to learn the hard way. Every 30 seconds, there’s a vehicle break-in attempt. So, lock up your valuables with a TJ Series II Security Console. This is a Tuffy Security replacement upgrade for the stock console and front shifter cover in ’97 to current Jeep TJs. It provides a lockable 16-gauge steel storage compartment incorporating a double hemmed 1/8” lid for extra protection and Tuffy’s Pry-Guard II Locking System. The system is the combination of a pick resistant ten tumbler, anti-twist push button lock, two point welded striker, and hardened steel latch for security. Each console is finished with a durable powder coat. For more tech info contact 800-348-8339 or check out www.tuffyproducts.com.

WHERE WOULD YOU BE WITHOUT YOUR WINCH AND OTHER TOOLS?
TUFFY doesn’t want you to find out, so they’re offering the Tuffy Security Bolt Lock. This lock provides protection from theft for your valuable tools with mounted bolts. Examples include winches, off-road lights, racks, mounted tools, and other items. This bolt lock installs easily to any 5/8” diameter or smaller bolt (maximum 9/16” for socket accessibility) and prevents access to the bolt or nut for purposes of removal. Each Security Bolt Lock is produced from 11-gauge steel and is finished with a durable black powder coat. They feature Tuffy’s Pry-Guard Locking System, which is designed to create a deadbolt effect by using a ten tumbler lock which is pick resistant, and a long mounting shaft for increased strength. For more tech information contact 800-348-8339 or check out www.tuffyproducts.com.

PAINLESS 12-CIRCUIT HARNESS FOR JEEPS
These Painless factory upgrades use the OEM fuse block and TXL High Temp wire for bulletproof performance. Two kits are designed for Jeeps. One for Jeeps made prior to 1975 where the wires run through a grommet in the bulkhead and the key is in the dash. The other uses the factory bulkhead connector so no special brackets or fabrication are required to make it fit to the fuse block. Open-ended wire leads allow for custom routing of wires. Both kits include standard 12-circuit features. The ’75 and later kit includes additional GM pre-wired plugs for ignition switch, dimmer switch and turn signal. For more tech info contact 800-423-9696 or check out www.painlessperformance.com.

WARN TRAIL FLARES FOR JEEP
Specifically designed for serious off-roaders, these polyurethane flares resist impact from rocks, trees and other off-road obstacles. Trail Flares hold their shape and resist sagging, even at high temperatures. The smooth outer surface is easy to clean, and pre-drilled mounting holes (except for CJs) make for fast installation. Approximately twice as wide as factory flares, they provide coverage for wide tires and extra protection for the vehicle body. Note: Sold in complete sets of four.
Applications Years Width
Jeep CJ ’72-86 4”
Jeep YJ Wrangler ’87-96 7”
Jeep TJ Wrangler ’97-03 7”
Jeep TJ Wrangler ’97-03 6”
For more tech info contact 503-722-1200 or check out www.warn.com.

WARN TIRE CARRIER
For carrying the oversize tires that serious off-roader’s require, the rear bumper is available in a version that is designed to accept the Warn Tire Carrier. Built to carry heavier tires (up to 36”), the tire carrier pivots on a beefy 1-1/2” solid steel shaft pin, which comes up from within the bumper into the frame of the tire carrier. The shaft itself is welded, not bolted. Structural t-joint welds (vs. corner welds) mean the bumper holds up in the long run. A polyurethane pad reduces rattling. Includes frame-reinforcing brackets. For more tech info contact 503-722-1200 or check out www.warn.com.