TO ORDER CALL 4 WHEEL PARTS AT 800-284-9840

EDELBROCK XTREME TRAVEL RESERVOIR SHOCKS
Edelbrock’s Xtreme Travel™ Remote Reservoir shocks combine patented RICOR Inertia Active System with the benefits of a reservoir for extra travel and increased oil capacity, delivering better performance and cooler operation in on and off-road conditions. They feature polyurethane bushings, a 5/8-inch diameter NitroSteel® piston rod for off-road durability; a Viton® seal and low-friction piston rod bearing for long life and no leaks; and a zinc-plated, clear powder-coated finish with high-quality -6 braided stainless steel line. The mono-tube design provides excellent heat dissipation resulting in consistent performance under all conditions. All Edelbrock IAS shocks are precision tuned and tested on a shock dyno before release. The exclusive IAS valve design delivers outstanding steering response with a smooth ride over rough roads, switching instantly between a firm and a soft circuit for superior handling and a comfortable ride. Available for Jeeps with 3-4.5” lifts: ’84-01 Cherokee XJ, ’86-95 Wrangler XJ and ’97-03 Wrangler TJ. For more tech info contact 310-781-2222 or check out www.edelbrock.com.

DAYSTAR JEEP COMFORT RIDE SUSPENSION SYSTEMS
Daystar’s Jeep Comfort Ride Suspension systems are made for ’97-04 TJ Wranglers, ’84-01 XJ Cherokees, ’94-98 ZJ Grand Cherokees, ’99-04 WJ Grand Cherokees and ‘02-04 KJ Libertys. Comfort Ride kits are specially designed to work with stock suspension components to keep costs down and quality high. These kits will give you a 2 -inch lift. Comfort Ride Suspension Systems provide extra clearance for larger tires, and overall, great appearance. Depending on their application, these systems allow the use of one or two larger than stock tire sizes. For more tech info contact 623-907-0081 or check out www.daystarweb.com.

EDELBROCK PERFORMER IAS SHOCKS
Edelbrock Performer IAS shocks for Jeeps deliver great handling response and a smooth ride over rough roads. As in the Xtreme Travel shocks, this design lets them switch instantly between a firm and a soft circuit for superior handling and a comfortable ride as well as sharing all the other features. They also include a limited lifetime warranty. For more tech info contact 310-781-2222 or check out www.edelbrock.com.

HELLWIG’S REAR ANTI-SWAY BARS FOR CJ’S, SCRAMBLERS, WRANGLERS, GRAND CHEROKEES & LIBERTYS
Hellwig’s bars are heat formed and coined as one piece to insure they will be the most durable, strongest and most resistant to form alteration. Most other aftermarket anti-sway bars are cold-bent making them weaker at the bends and more vulnerable to shape alteration. Hellwig’s kits feature high quality hot formed and heat-treated 4140 chrome moly spring steel and polyurethane bushings. Benefits include: reduced body roll for better vehicle control; improved cornering traction for safer driving and turning capabilities; and weight evenly distributed to all four wheels. Easy bolt-on installation with simple hand tools. Each anti-sway bar is engineered and developed for each specific application and includes a Lifetime Warranty. For more tech info contact 800-367-5480 or check out www.hellwigproducts.com.

RANCHO JEEP RUBICON TJ SPRING DELETE KIT
Rancho’s latest version of their Rockcrawler kit without coil springs is for the person who runs at maximum GVW but, still wants to retain the original Rockcrawler system height to enjoy on/off-road performance features regardless of load. There’s the option to order the Rockcrawler kit including standard springs, or, one with Rancho’s new competition springs for highly accessorized/loaded vehicles like the Rubicon.

Note: Some vehicles may experience a rear driveshaft vibration. A replacement rear double-cardan driveshaft (for Rubicons only) is available from Powertrain Industries. For maximum ground clearance, use this new driveshaft and remove the Rancho transfer case skid plate spacers and any shift relocation bracketry. Coil spring kits sold separately. For more tech info contact 734-384-7804 or check out www.gorancho.com.

RANCHO EXPANDS LINE OF FULLY ADJUSTABLE RS9000X PERFORMANCE SHOCKS
Rancho’s RS9000X nine-position fully adjustable performance shock absorber is now available for additional on and off-road applications (including Jeep), in several extended-length designs. Featuring an advanced tri-tube mono-flow design and nine-position adjustable valving, the shock enables drivers to manually or remotely (from the cab) tune damping performance to match performance situations. The shock’s reserve/intermediate/primary tubes and mono-flow configuration yield 17 times greater fluid area than the original RS9000, ensuring exceptional performance under a full range of load and temperature conditions. The RS9000X features Rancho’s exclusive 15-stage velocity-sensitive valving for enhanced stability and traction. Each shock includes a 16-mm-diameter hardened double-chromed rod, 32-mm-diameter piston with Teflon band and an all-new rod guide design that reduces friction and improves flow for enhanced ride comfort. For more technical information contact 734-384-7804 or check out www.gorancho.com.

FABTECH TJ 2.5” ADJUSTABLE SYSTEM
The 2.5” basic suspension system for ’97-03 Jeep TJ features an adjustable coil spring seat that retains the stock front and rear coil springs or aftermarket springs. The heavy-duty steel billet coil adjusters do not change the ride and allow adjustment to the suspension ride height. And can be adjusted front to rear to compensate for heavy cargo or a winch. System includes extended length bump stops and a spanner wrench to allow adjustment with the vehicle on the ground. For more tech info contact 909-597-7800 or check out www.fabtechmotorsports.com.

FABTECH 3.5” YJ SUSPENSION
This 3.5-inch performance suspension system fits ’87-96 Jeep YJ Wranglers. Heavy-duty front and rear leaf springs feature nylon glide pads between each leaf for a friction free ride. Front springs employ 5 leafs while rear springs are comprised of a 4-leaf pack. Front and rear spring eyes are constructed with a full military style wrap for superior strength and dependability. The transfer case is relocated via billet aluminum spacers that allow the use of the stock skid plate. This system comes complete with a drop pitman arm, extended sway bar links, track bar relocation brackets and more. System allows use of a 33x12.50R15 tire on a 15x8 wheel. For more tech info contact 909-597-7800 or check out www.fabtechmotorsports.com.

FABTECH 4” JEEP SUSPENSION SYSTEM
Fabtech’s 4” Performance System for ’84-01 Jeep XJ Cherokee 4WD includes heavy wall tubular lower links with their rotational urethane joints for superior articulation with a noise-free highway ride. Also included are smooth ride front coil springs, bump stops, and extended sway bar links. Rear lift is accomplished via a 2” heavy duty shackle and add-a-leaf system. System allows the use of a 32x11.50R15 tire on a 15x8 wheel. Available in black or blue powdercoat. For more tech info contact 909-597-7800 or check out www.fabtechmotorsports.com.

FABTECH 6” TJ LONG ARM SUSPENSION SYSTEM
Fabtech’s Long Arm System for ’97-04 Jeep TJs features a cutting edge link geometry that provides increased travel and articulation without pinion angle change during the full suspension cycle. Extended length upper and lower links arms attach to a heavy duty sub frame eliminating all stock frame link pockets while utilizing the factory axle brackets. Rotational urethane joints on each end of the link arms provide unrestricted movement like a heim end, but, without the noise transfer associated from heims. System includes front and rear adjustable trac bars, pitman arm, front sway bar disconnect links, rear sway bar links, front and rear coil springs, bump stops, rear shock relocation brackets, brake hoses and more. System allows use of 35x12.50R15 Tires. For more tech info contact 909-597-7800 or check out www.fabtechmotorsports.com.

SKYJACKER 2.5” PLATINUM SERIES S-COIL SYSTEM FOR LIBERTY.
Skyjacker has released a 2.5” Platinum Series S-Coil system upgrade for the Jeep Liberty that replaces the factory front strut with Platinum Series Shocks and Softride® Coil Springs plus, replacement Softride Coils in the rear. The lift makes room for 245/75R16 tires. System features include: no modifications to factory rack and pinion assembly; Platinum Series linear S-Coils; massive 2” piston bore; off-road race inspired wafer valving; pre-set Softride front and rear coils replacement bumpstops. For more tech info contact 318-388-0816 or go to www.skyjacker.com.

SKYJACKER 2.5” & 4” ROCK READY® FOR YJ
The new Softride Double Military Wrap Springs from Skyjacker feature Teflon wear pads, tapered leaf construction, grade 8 tie bolts and bolt clips. The bolt style clips use a bolt across the spring leaves to eliminate friction within the leaves increasing spring travel. The second leaf wraps around the spring eye without contact. This allows for the spring to move freely without friction under normal riding conditions. In extreme off-road situations, the spring eye will contact the second leaf adding additional strength and support. The 2.5” springs are designed for spring over or spring under applications. Features include Softride design, added torque control and main leaf protection. This provides improved ride quality and handling characteristics, and increased wheel travel. For more tech info contact 318-388-0816 or check out www.skyjacker.com.

SKYJACKER’S ROCK READY 6” LIFT FOR CHEROKEE
Skyjacker produces the Rock Ready® 6” Suspension Lift for ’89-99 Cherokee XJs. The 6” lift is achieved with full-height Softride® 6” coils in the front. The rear is lifted with full-height Softride rear leaf springs with “greaseable” shackles. The new sub-frame assembly consists of two frame brackets and a transmission cross member. Once tied to the factory unibody, it makes for a virtually indestructible assembly. The rest of the system consists of the adjustable track bar, upper and lower double flex links. It includes a 3-piece sub-frame assembly, adjustable track bar with steering stabilizer, double disconnect front sway bar links and rear sway bar end links, extreme drop pitman arm, and stainless steel braided brake lines. This provides improved handling and increased wheel travel. Clears 33-inch tires. For more tech info contact 318-388-0816 or check out www.skyjacker.com.

(TO ORDER CALL 4 WHEEL PARTS AT 800-284-9840

EXPLORER PRO COMP EQUIPS JEEPS FROM ’53 ON
Pro Comp offers suspension systems for a vast range of Jeep applications dating back to early 1953 model CJ’s — to today’s XJ/TJ/ZJ/WJ versions. With an attention to detail and complete bolt-on installations, Pro Comp delivers 4” and 5” lifts with the Jeeper in mind. Features such as CJ/YJ heavy vehicle lift springs, extended braided stainless brake lines for positive brake response and up to 10” of functional wheel travel. They also offer Stage II versions, which feature adjustable front track-bar and matching relocation brackets, as well as a drop pitman arm. The YJ Coil Spring Conversion is the 5” package that provides clearance and fit for 33” rubber on 8” wide rims. This kit features coil springs designed exclusively for the YJ and provides 10” of functional wheel travel. MX6 mono-tube 6 position adjustable premium shock upgrades are available for most models.

’53-96 Jeep CJ/YJ
•Progressive rate diamond cut springs
•Spring rates ideal for heavily equipped vehicles
•YJ Box kits include; front and rear track bar relocation brackets, extended sway bar links, extended bump stops, front U-bolts and transfer case lowering hardware
•4” drop pitman arm available for CJs and YJs with power steering
•Extended braided stainless brake lines available for positive brake response

Jeep YJ /CSC
•5” lift provides clearance for 33” tires on 8” wide rims
•10” of functional wheel travel
•Coil springs designed and rated exclusively for the YJ
•Track bar relocation brackets and dropped forged pitman arm
•Includes ES9000 shock absorbers
•ES2000 steering stabilizer included
•4-link chromolly series control arms
For more technical information contact 619-216-1444 or check out www.explorerprocomp.com.

Jeep XJ/TJ/ZJ/WJ
•4” Stage I kit utilizes chromolly lower control arms with reverse hourglass urethane bushings, along with custom tailored spring rates for optimum performance
•Includes transfer case lowering hardware, extended sway bar links, rear track bar relocation bracket and shifter relocation hardware
•4” Stage II kit adds adjustable front track bar, with matching track bar relocation bracket and a drop pitman arm Note: MX6 suspension packages available on all the above.

SUPERLIFT’S 2”, 4” & 6” SUSPENSION LIFTS FOR 1997-2004 TJ’S
Superlift’s 6” lift system (pictured) takes the TJ to the next level of off-road performance. Also, it allows TJ owners who already have 2” or 4” Superlift kits to effectively upgrade to the 6” system. The complete 6” system includes front- and rear-axle Rockrunner lower trailing links that incorporate swivels to enhance articulation. Other components include bumpstop extensions, extended swaybar end links, new Superide front and rear coil springs, coil spacers, a dropped pitman arm, transfer-case lowering plates and new Superide shock absorbers. (Upgraded Bilstein shocks are available.) Combine the Rockrunner arms with Superlift’s optional swaybar quick-disconnects and extended braided-steel brake hoses for the ultimate in suspension flexibility. This system provides enough room for most 35” tires on standard-offset rims. For more tech info contact 800-551-4955 or check out www.superlift.com.

SUPERLIFT OFFERS 3.5” LIFT KIT FOR YJ’S
Superlift gives YJ owners the quality ride they desire by offering two different spring rates in their 3.5” lift kit. A softer set is available for 4-cylinder Wranglers and/or softtop-equipped rigs while stiffer leafpacks are offered for YJs that have the larger engine, hardtop and accessories such as a winch. Potential driveshaft vibration is cured with a transfer-case lowering kit and rear-axle degree shims. Other standard features include extended swaybar links that prevent bar pre-loading, bumpstop extensions to prevent suspension over-compression, and track bar relocators to restore handling. Also, brake-hose relocation brackets ensure adequate hose length. The kit comes complete with U-bolts and self-locking hardware. An optional dropped pitman arm is recommended, and Superlift also offers the TruSpeed speedometer recalibrator. For more tech info contact 800-551-4955 or check out www.superlift.com.

RANCHO PRO SERIES™ ADJUSTABLE REMOTE RESERVOIR SHOCKS
Rancho’s fully adjustable gas-charged remote reservoir shock absorbers are engineered for serious off-roading. They combine RS9000X nine-position adjustable technology with an advanced remote reservoir configuration ideally suited to hard-core off-road driving, where heat-related shock fade often can be an issue. Available for Jeeps equipped with Rancho suspension systems - and in extended-length units. Pro Series shocks are engineered to provide more consistent performance over a longer period of use, important for off-roaders who might push conventional shocks to their performance limits. Each shock can be mounted in any position and is delivered complete with “piggyback” cushions and clamps. The Pro Series shock features nine-position adjustable valving, enabling the driver to manually or remotely (from the cab) tune damping performance to match a vast range of performance situations. Each includes a 16-mm-diameter hardened and double-chromed rod, 32-mm-diameter piston with Teflon band and an all-new rod guide design that reduces friction and improves flow for enhanced ride comfort. . Rancho also offers an optional in-cab remote control kit -that permits adjustment of front and/or rear shocks while the vehicle is in motion. For more tech info contact 734-384-7804 or check out www.gorancho.com.