Neat Stuff on the Market

PRODUCTGUIDE Neat Stuff on the Market QUICK & EASY BIG BRAKES Late model Chevy half-ton trucks/SUVs and Dodge Rams that tow and haul, can now bolt on a high-performance front braking system from Stainless Steel Brakes Corporation. SSBC Quick-Change brake upgrade kits use SSBC’s SuperTwin aircraft-quality aluminum calipers for serious clamping power. Each lightweight front caliper is loaded with high performance brake pads and two oversized 48mm stainless steel pistons, which resist corrosion and help insulate the brake fluid against fade-inducing heat. Installed with or without SSBC’s optional braided stainless steel flex hoses, the Quick-Change kit improves clamping power and offers a firm pedal feel. The Quick-Change kit installs easily: Unbolt factory calipers and replace them with SuperTwin calipers, properly torque all hardware, bleed the system, and you’re done. You can reuse stock rotors, or upgrade to their Turbo-Slotted and Xtra-Life plated factory replacement rotors. Choose the standard clear anodizing or upgrade to a polished finish — or, optional red, yellow, orange, blue, black or silver powdercoating for a splash of color. For tech info contact 800-448-7722 or check out www.ssbrakes.com.

JBA PERFORMANCE HEADERS AND EXHAUST SYSTEMS FOR ’04 FORD F-150 5.4L 3VALVE V8 JBA Headers now offers smog legal JBA Cat4ward® headers and exhaust systems for ’04 Ford F-150 5.4L 3v V-8 engines. JBA’s precision made headers features thick 409 stainless steel tubing, 3/8” one-piece laser cut flanges, and the patented high flow JBA Firecone® merged collector. High temperature ceramic coating is optional. Add a JBA performance exhaust system, available in 304 stainless steel or high quality aluminized, and get even more low-end power and a healthy exhaust note. The exhaust systems are available in single side exit or dual rear exit. This combination delivers a significant increase in torque and horsepower throughout the rpm’s. JBA’s matched components are 50- state smog legal and covered by a limited lifetime warranty. Complete header and exhaust packages are also available for most popular GM, Ford, Jeep, Toyota and Dodge trucks and SUVs. For tech info contact 800-830-3377 or check out www.jbaheaders.com.

BESTOP “EXTENDATRUNK” FOR JEEPS Bestop Extendatrunk offers maximum secure storage in the rear of Jeeps. With the rear seat removed, the base unit attaches using original seat hardware and offers 12.5 cubic feet of lockable storage. Its quick-open lid provides convenient access, and removes quickly for carrying oversized loads. The versatile lid also slides out to form an instant picnic area for tailgating. The Extendatrunk is constructed of twin-walled super linear plastic for strength and durability that keeps contents safe. It is water-resistant and easy to install. For even more storage, the “Extendatrunk Cage” almost doubles the amount of secure, lockable space. The Cage mounts to the top of the Extendatrunk in less than a minute, with no drilling required—and can be removed as quickly. Safety rods secure the Cage to the Extendatrunk, while powder-coated 1” steel tubing holds gear securely within the Cage. The top of the Cage also hinges up for quick and easy access. Extendatrunk and Extendatrunk Cage applications are available for the 1986-2003 Wrangler. For tech info contact: 800-845-3567 or check out www.bestop.com.

FOR 1997-2204 WRANGLERS, SUPERLIFT 2”, 4” & 6” SUSPENSION LIFTS Superlift offers 2”, 4” and 6” suspension systems for all ‘97-’04 Jeep TJ Wranglers — including the Rubicon. The 6” lift allows TJ owners who already have a 2” or 4” Superlift kit-to effectively upgrade to 6” system. Highlights begin with front-and rear-axle Rockrunner lower trailing links that incorporate a swivel to enhance articulation. Other major components include bumpstop and swaybar extensions, new Superide front and rear coil springs, high-density rubber coil spacers, a dropped pitman arm, transfer-case lowering plates and new Superide shock absorbers. Also included are adjustable front and rear track bars to center axles and eliminate “wandering”. Superlift also offers optional Rockrunner upgrades: a high-clearance skidplate and replacement upper link arms further maximize articulation. Combine the Rockrunner arms with Superlift’s optional front and rear swaybar quick-disconnects and extended braided-steel brake hoses for ultimate suspension flexibility. A heavy-duty Slip Yoke Eliminator Kit (sold separately) is required with this system to alleviate rear driveline angles. A speedometer recalibrator is available too. This system can accommodate most 35” tires on standard-offset rims. No cutting or welding required — and it’s backed by a limited, lifetime warranty. For tech info contact 800-551-4955 or check out www.superlift.com.

GIBSON ELITE SERIES The folks at Gibson say the Elite Series features the best and most advanced exhaust systems money can buy. It consists of T-304 Stainless mufflers, tubing, and tips. All parts are internally and externally high polished ceramic coated for the ultimate in finish and durability. They have also gone one step further and eliminated the ‘U’ shaped muffler clamps and added their popular Clampless Technology to the complete kit. For finishing touches, the new Dual Walled Intercooled T-304 Clampless Stainless Steel Tips will ensure years of brilliant shine without the hassles of monthly polishing. They also come with a lifetime warranty. For tech info call 800-528-3044 or check out www.gibsonperformance.com.

K&N CARBON-FIBER AIR FILTERS AND BREATHERS Carbon Fiber combines a stunning visual presence with tough, durable performance. Now K&N Engineering adds carbon-fiber tops and bases to its line of universal clamp-on air filters and carbon tops to its oil vent filters/breathers. K&N begins with carbon fiber matting with an aesthetically pleasing, perpendicular weave. The mats and resin are placed in appropriate molds and K&N logo is machined in each lid’s die. Next, the molds go into an industrial autoclave that applies heat and pressure to cure the carbon fiber. Once removed from their molds, the carbon-fiber components are mated to the company’s FilterCharger® media-a pleated sandwich of oil-impregnated gauze and epoxy-coated wire mesh that is washable and reusable, and carries K&N’s limited, Million Mile Warranty. This filtration exceeds airflow capabilities of OE-style paper elements by more than 50%. Available in 3” clamp-on mounting diameters in straight round or tapered conical styles, K&N Carbon-Fiber filters are available for many custom applications. Carbon Fiber-topped breathers are available in 3/8” vent outside diameters. For tech info contact 800- 213-4182 or check out www.knfilters.com.

TRANSGO’S® “A-LIST” AOD-E Making the grade in performing “arts” is made easy with TranGo’s AOD-E Performance Shift Kit® for 1991-2003 light trucks fitted with Ford’s AOD-E automatic transmission. TransGo engineers each kit to fit specific applications. Each installation can be done using normal hand tools and without transmission removal. A full color, step-by-step instructional video is included. TransGo AOD-E Performance Shift Kit reprograms your electronic four-speed to act like a real performer. An added feature of the kit is the inclusion of an EPC relief valve, to prevent engine “runaway” and 2nd roller and mid-shift breakage. Special custom rings are also included to prevent 4th band failure, while other parts correct the soft shifting complaint common with the AOD-E. For tech info contact 626-443-4953 or check out www.transgoperformance.com.

MILE MARKER’S NEW E3000 UTILITY WINCH Mile Marker is broadening their electric winch line again with the new E3000 Utility Winch. This Winch is ideal for car trailers. The E3000 uses a planetary Gear system for fast line speed: Powers in or out; comes with a hand held plug-in remote; Free spooling; has a 3/16” x 50 foot cable and hook; and hawse fairlead. For a free catalog and video or DVD contact: 800-886-8647 or check out www. milemarker.com.

WESTIN ULTIMATE BULL BAR™
Westin's new ULTIMATE BULL BARt™ has been completely redesigned for each vehicle to fit more snugly and provide more ground clearance! Manufactured from 3" Chrome Plated Stainless Steel tubing, or hot rolled carbon steel with a tough black powdercoat finish, the Westin Bull Bar is a fully functional light bar. In addition, there are black molded covers on the center crossbar for a clean look. And, the skid plate is now included with each Bull Bar, complete with a laser-cut Westin Logo. For tech info contact 800-345-8476 or check out www.westinautomotive.com.

AIRAID® PRE-FILTERS AIRAID Pre-Filters are uniquely designed to provide extreme protection through maximum filtration. AIRAID Pre-Filters are manufactured from durable polyester material. This unique material contains uniform micron openings that will filter out debris .005 and larger. For added protection, the Pre-Filters are also designed to be water-resistant. Independent dyno and flow-bench testing report that there is no significant loss in horsepower or airflow from the use of this product. To clean, simply wash with soap and water then let air dry. For tech info contact 800-498-6951 or check out www.airaid.com.

HEAVY LOADS AND SMOOTH RIDE Ride quality and load capacity are directly affected by spring rate. If you haul heavy loads, more spring tension is needed to keep the load under control, but ride quality suffers. This also works in reverse: Less spring weight means less load capacity, and a smoother ride. Now, Hellwig Products helps narrow the gap between these two issues with “Poly Spring Stabilizers”. By inserting a polyurethane block or “insulators” between the Stabilizer and main spring, the block becomes a control link between stabilizer leaf and main spring. “Body-roll” spring wrap-up, extra weight, along with leaf spring compression /rebound are controlled, resulting in a smoother ride. These high quality, precision arched springs are matched with application-specific mounting kits, to provide all components for a simple no drill, bolt-on installation with lifetime warranty.For tech info contact 800-367-5480 or check out www.hellwigproducts.com.

SURE-GRIP™ ALUMINUM RUNNING BOARD Westin’s new SURE-GRIP aluminum running board offers a 4 1/2” wide step surface that features a high-grip rubberized step pad for secure footing. And, an optional bright LED light kit can be purchased separately to illuminate the step area when the vehicle door is opened. The boards are available in 5 lengths-54”, 69”, 72”, 79”, and 93”-with vehicle-specific mount kits sold separately. For tech contact 800-345-8476 or check out www.westinautomotive.com.

RANCHO” TRIPLE-ADUSTABLE COIL-OVER SUSPENSIONS Rancho introduces new suspension tech for late-model light trucks and SUVs: Triple-adjustable coil-over systems that allow drivers to modify compression and rebound damping and vehicle ride height. These new ‘04 systems will be available for new Ford F-150 and Nissan Titan. Additional, later applications will include Ford Explorer and Expedition, Toyota Tacoma and Tundra, and Jeep Liberty. Rancho also offers a 4” knuckle suspension system for the ‘04 F-150, to be used with their RS9000X nine-position, fully adjustable (front) and new Pro Series remote reservoir (rear) shock absorbers. Rancho says these new “affordable and easy to install coil-over systems allow owners to upgrade to 35-inch tires and enjoy a range of adjustability — that’s been limited to the sport-compact passenger car market. They combine “on-the-fly” in-car damping adjustability with the performance and handling precision of a true tri-tube (reserve/intermediate/primary) design”. Rancho Triple coil-over’s adjustable ride height and nine-stage in-car adjustable damping control include an in-cab remote system for push button/independent front and rear damping adjustment. For more info contact 734-384-7804 or check out www.gorancho.com.

BIG TRUCKS BENEFIT FROM SWAY-A-WAY’S TORSION BARS Sway-A-Way introduces its complete line of Torsion Bars specifically designed for Ford, Chevy and GM big truck applications. Yukons, Tahoes, Suburbans, Escalades, Expeditions and Hummer 2’s will benefit from the big torsion bars’ adjustable splined end with matching adjuster. The splined end also allows for fine ride height adjustment —either negative, or positive. The larger diameter featured with these torsion bars offers a firmer and smoother ride. When off-roading or towing heavy loads, these torsion bars eliminate hard bottoming, improve vehicle street handling and provide a more consistent spring rate for better control. All torsion bars are manufactured from aircraft alloy steel and have a 20-30% higher spring rate than stock bars, Sway-A-Way also manufactures a complete line of high performance suspension components for small trucks and performance vehicles. For tech info contact: 818-700-9712 or check out www.swayaway.com.

ORION 4 TO 1 TRANSFER CASE FOR LAND CRUISERS New for 2004, Advance Adapters introduces the Orion transfer case. This new 4.0:1 ratio and cast iron case is designed to capture the attention of the Land Cruiser enthusiast. Orion kits come with a new case, four new gears, a new, larger cluster pin, and a complete gasket bearing and seal kit. This transfer case, however, is not a complete unit ready to bolt in like the Atlas. The transfer case does require the use of your stock front and rear output shafts and housing and the use of the stock P.T.O. and inspection covers. The unit can be used to replace either the stock 3 or 4 speed transfer cases. The new case is exactly the same size and bolt pattern as the stock Land Cruiser transfer case, so no driveline modifications are required. It will fit to any transmission that a stock transfer case was coupled to. Future Orion upgrades include a complete unit assembled and ready-to-install into the vehicle. This option will also allow the Orion to be used in vehicles other than a Toyota Land Cruiser. One of the first applications is a Jeep Dana 18 replacement. Watch their web site for application updates. For tech information contact: 800-350-2223 or check out www.advanceadapters.com.